Product Info:

Can be used as reinforcement fabric on the exterior in a thermal insulation system under plaster or on the interior under plaster. Furthermore, for loose laying in the roof area, underneath attached facades, underneath floor coverings, etc.

• Attenuation: 23 dB
• One product for reinforcement in a thermal insulation system as well as shielding
• Patented glass fibre mesh with stainless steel threads woven into it
• The glass fibres are reliably protected against alkaline attacks in the plaster system by a high-quality finish
• Electrically conductive surface for easy grounding
• Audited and certified according to ETAG 400
• Color: Schwarz
• Tensile strength max.: 1750 N/5 cm (warp and woof)
• Elongation max.: 3.9 % (warp and woof)
• Materials: Fibre glass, stainless steel fibers, latex coating

Processing Instructions

The processing of the shielding mesh is identical with the application of conventional glass fibre fabric. Needs to be pressed non-porously and wrinkle-free into the freshly spread reinforcing mass, then levelled out.. The mesh needs to lie in the upper third of the reinforcing mass and be completely covered by it. The overlapping between the panels needs to be 10cm. The overlapping needs to be ensured at corners of a building, too. Building openings (windows, doors) require a diagonal reinforcement with fabric strips. Has the mesh been cut in (e.g. in the area of scaffolding anchors), an additional fabric strip needs to be placed above the cut. For grounding, the stainless steel tape GSS25 must be screwed securely onto the underground across/with all panels.

Dimensions:

• Width: 100 cm
• Mesh width: 3.5 x 4.0 mm
• Length: By the meter / 50 m roll
• Material thickness: 0.45 mm
• Weight: 180 g/m²

Technical Details: