Anti radiation paint - YShield DRY54


5G radiation protection – Proven effectiveness against wide spectrum of 5G radiation

30 – 46 dB (99.9% – 99.995%) shielding efficacy – Certification by OEM lab.

Comes in 2 sizes – 1litre (650 gms) and 5 litre (2.5 kgs) equivalent packs

1 litre covers 40-80 sq.ft wall area depending upon surface, texture, number of coats etc

VOC under check. Graphene is not used in this product.

Breathable, solvent free, low-emission.

Multiple coats can be applied for enhanced performance

Best value for money

Used for shielding dry wall constructions, gypsum boards, putty walls.



Anti Radiation paint – YShield DRY54 is a dry powder electro-conductive coating for the protection against high-frequency (HF) radiation and (or) against low-frequency (LF) electric fields. Typical areas of application are living areas (e. g. bedrooms, nurseries, living rooms), or the protection of whole buildings.


  • Screening attenuation: One-layer 30 dB (8 m²/l) to 36 dB (4 m²/l), two-layer 36 dB (8 m²/l) to 41 dB (4 m²/l).
  • Coverage: One-layer (8 m²/l), two-layer (4 m²/l).
  • Underground: Interior and exterior: Excellent adhesion on almost all undergrounds like existing emulsion paints, sheetrock, wallpaper, cement, plaster, masonry, wood, etc.
  • Top coating: Preferably covered with plastic bonded, water-based emulsion paints, dispersion silicate paints, facade paints or silicon resin paints. Not applicable are pure mineral paints (clay, loam, chalk, silicate).
  • Due to the high adhesive tensile strength (to ETAG 004 for EIFS-systems, minimum 0.08 N/mm²), applicable directly under pure organic plaster, no mineral pasters!
  • Grounding: Must be grounded! We recommend interior the grounding strap EB2 plus grounding plate GW (GB) plus GP, exterior the fiber additive AF3 plus the grounding plate GE.
  • Ingredients: Water, pure acylic dispersion, carbon fibers, carbon black, additives, preservative (MIT, BIT).
  • Technical data: VOC-content: 0.2 g/l (the EU limit value for category A/a is 30 g/l from 2010). Sd-value: 0.1 m. Ph-value: 8. Adhesive tensile strength: 4.8 N/mm²
Login Form
Login Form